Welcome to Standphill India

  • CALL US: +91-9667674225
  • Mail US : info@standphillindia.in
  • Laxmi Nagar New Delhi
image
BIS ISI Mark certification for electric water heaters is mandatory in India under IS 2082:2018 and related standards. Standphill India provides end-to-end BIS certification consultancy for domestic water-heating appliances, helping manufacturers achieve fast approvals, full compliance, and hassle-free certification.

BIS Certification for Electric Water Heaters in India


The Indian government has made BIS ISI Mark certification mandatory for electrical appliances used for domestic water heating under the Electrical Appliances for Domestic Water Heating (Quality Control) Order, 2025.


From 1st March 2025 onwards, manufacturers of electric water heaters, immersion heaters, instantaneous water heaters, and related appliances must comply with applicable Indian Standards and obtain BIS certification under Scheme-I (ISI Mark Scheme).


Among all applicable standards, IS 2082:2018 – Stationary Storage Type Electric Water Heaters is the most widely applicable and critical standard, covering conventional electric geysers used in homes across India.


Standphill India has emerged as a leading BIS certification consultant for electric water heaters, helping manufacturers comply with IS 2082 and other applicable standards efficiently and without regulatory risk.


What Is BIS Certification for Electric Water Heaters?


BIS Certification confirms that an electric water-heating appliance conforms to the prescribed Indian Standard (IS) related to safety, performance, construction, and energy reliability.


For domestic manufacturers, certification is granted under BIS Scheme-I, allowing the product to bear the ISI Mark.


Without BIS ISI certification:


i. ) Manufacturing is illegal


ii. ) Sales are prohibited


iii. ) Penalties apply under the BIS Act, 2016


Applicable BIS Standards for Domestic Water Heating Appliances


Under the 2025 Quality Control Order, the following Indian Standards are notified:


1. IS 2082:2018 – Stationary Storage Type Electric Water Heaters (Primary Focus)


This standard applies to:


i. ) Conventional electric geysers


ii. ) Storage-type water heaters for domestic use


iii. ) Wall-mounted or floor-mounted water heaters


Mandatory Implementation Dates


Enterprise Category Compliance Deadline
General manufacturers 1st March 2025
Small enterprises 1st June 2025
Micro enterprises 1st September 2025


2. IS 302 (Part 2 / Section 21):2018


Applies to:


i. ) Appliances for stationary storage-type electric water heaters


ii. ) Covers electrical safety and construction requirements


3. IS 302 (Part 2 / Section 35):2017


Applies to:


i. ) Electric instantaneous water heaters (tankless water heaters)


4. IS 368:2014 – Electric Immersion Water Heaters


Applies to:


i. ) Portable immersion rods used for domestic water heating


5. IS 17150:2019 – Mini Domestic Water Heater (PNG)


Applies to:


i. ) Mini domestic water heaters operating on piped natural gas (PNG)


ii. ) Covered briefly for manufacturers with combined product lines


Who Needs BIS Certification for Electric Water Heaters?


BIS ISI Mark certification is mandatory for:


i. ) Domestic manufacturers of electric water heaters


ii. ) OEMs producing geysers under private labels


iii. ) Manufacturers of immersion heaters and instantaneous heaters


iv. ) Startups entering the domestic appliance segment


Export-only manufacturing units are exempt, provided products are not sold in India.


BIS ISI Mark Certification Process for Electric Water Heaters


Step-by-Step Process


1. ) Identification of applicable IS standard (IS 2082, IS 368, etc.)


2. ) BIS online application submission


3. ) Technical document and quality plan review


4. ) Factory inspection by BIS officials


5. ) Product sample testing in BIS-recognized laboratories


6. ) Grant of ISI license and marking approval


With proper preparation, the process typically takes 30–60 working days.

BIS ISI Mark Certification Process for Electric Water Heaters

BIS ISI Mark Certification Process for Electric Water Heaters

Documents Required for BIS Certification (IS 2082 & Related Standards)


1. ) Factory registration and MSME certificate


2. ) Manufacturing process flow diagram


3. ) Quality control plan


4. ) Test equipment list with calibration


5. ) Product drawings and specifications


6. ) Raw material details


7. ) Internal test records


8. ) Authorized signatory documents


Standphill India audits all documents before submission to ensure 100% compliance.


Penalty for Non-Compliance


Manufacturing or selling electric water heaters without BIS certification may result in:


1. ) Heavy fines


2. ) Product seizure


3. ) Factory shutdown


4. ) Legal prosecution under the BIS Act, 2016


Why Standphill India Is the Best BIS Consultant for Electric Water Heaters


Standphill India is a trusted BIS certification consultancy with proven expertise in IS 2082:2018 and related water-heating appliance standards.


What Sets Standphill India Apart


i. ) Extensive experience with electric water heater certification


ii. ) Pre-inspection factory readiness audits


iii. ) Expertise across IS 2082, IS 302, IS 368, IS 17150


iv. ) High approval success rate


v. ) Faster turnaround times


vi. ) Transparent pricing


vii. ) End-to-end BIS handling


Standphill India has helped 1000+ manufacturers, including top reputed appliance brands, obtain BIS certification successfully.


Why Manufacturers Trust Standphill India


1. ) Deep understanding of BIS Scheme-I


2. ) Practical approach aligned with BIS inspection expectations


3. ) Strong coordination with BIS labs and authorities


4. ) Long-term compliance and renewal support


This consistent performance positions Standphill India as one of the top BIS consultants for domestic water-heating appliances in India.


Conclusion


With the enforcement of the Electrical Appliances for Domestic Water Heating (QCO) Order, 2025, BIS ISI Mark certification is no longer optional for electric water heaters and related appliances.


For manufacturers targeting compliance under IS 2082:2018 and allied standards, choosing the right consultant is critical.


Standphill India offers reliable, fast, and end-to-end BIS certification support, making it the preferred choice for manufacturers of electric water heaters, immersion heaters, and instantaneous water-heating appliances.

Our Frequently Asked Questions

Request a call back.

For Business:   For Business inquiry fill our short feedback form or you can also send us an and we’ll get in touch shortly, or Toll Free Number +91 85279 30453.

Office Hours : 09:00 and 20:00 Mon to Sat, Sun - Closed

Send Message