BIS Certification for Electric Mat IS 302 Part 1:2024 - HAESI GHL Private Limited, Khushkhera, Khairthal Tijara, Rajasthan | Standphill India

Standphill India successfully completed BIS ISI Mark certification under IS 302 Part 1:2024 for HAESI GHL Private Limited - an electric mat manufacturer based at Ground Floor, E-11 (E-81), Block-B, Sarekhurd Industrial Area, Khushkhera, Khairthal Tijara, Rajasthan. The BIS license bearing number 840035**** was officially granted on May 10, 2026, and remains operative through May 9, 2031. Standphill India managed the complete certification process from factory assessment to final license grant.

HAESI GHL Private Limited is an electric mat manufacturer based in the Sarekhurd Industrial Area, Khushkhera - one of Rajasthan's most strategically located industrial corridors in the Khairthal Tijara district, positioned along the Delhi–Jaipur NH-48 highway belt. Khushkhera has grown rapidly as a serious manufacturing hub in northern Rajasthan - its proximity to Delhi NCR, strong road connectivity, and availability of industrial land have attracted a wide range of electrical, electronic, and consumer goods manufacturers who serve India's domestic market from a competitive location.

Electric mats - electrically powered heating and comfort mats used in residential and commercial settings - are classified as mains-powered electrical heating appliances under the BIS mandatory certification framework. These are life-safety products: a substandard electric mat with inadequate insulation, absent thermal cutoffs, or poor cord construction can cause electric shock, burns, or fire. This is precisely why electric mats are notified under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 - and why BIS ISI Mark certification under IS 302 Part 1:2024 is mandatory, not optional.

HAESI GHL Private Limited's BIS certification - granted on May 10, 2026 - positions the company ahead of the October 1, 2026 mandatory compliance deadline for the broader electrical appliance industry. Their products are legally compliant, market-ready, and carry the ISI Mark that institutional buyers, organised retailers, and e-commerce platforms require.

IS 302 Part 1:2024 is India's mandatory safety standard for household, commercial, and similar electrical appliances - covering general safety requirements aligned with IEC 60335-1:2020. Electric mats (listed as item 68 - Foot Warmers and Heating Mats - and item 89 - DC Supplied/Battery-Operated Foot Warmer and Heating Mats) are explicitly notified under the Quality Control Order 2026, effective October 1, 2026.

BIS certification under IS 302 Part 1:2024 is now mandatory for electric mat manufacturers across India.

Full details on IS 302 Part 1:2024 requirements, the complete list of 90 notified appliance categories, implementation deadlines, and compliance obligations are available on our dedicated service page.

INTERNAL LINK: Mandatory BIS Certification for Household and Commercial Electrical Appliances - IS 302 Part 1:2024 - QCO 2026

Standphill India conducted a pre-audit gap analysis at HAESI GHL Private Limited's Sarekhurd Industrial Area facility in Khushkhera - assessing the manufacturing process, electrical safety testing infrastructure, thermal performance and cutoff controls, insulation and dielectric testing systems, cord and connection construction, product marking compliance, and quality documentation against IS 302 Part 1:2024 requirements. Every compliance gap was identified and resolved before the BIS application was filed.

Complete IS 302 Part 1:2024 aligned technical documentation was prepared and submitted through the BIS portal. Electric mat samples were tested at a BIS-recognised laboratory covering all required parameters - electrical safety, temperature limits, thermal endurance, mechanical strength, flexing endurance, moisture protection, and marking - with first-attempt clearance. On-ground support was provided throughout the BIS factory audit at the Khushkhera facility. Post-audit follow-up was managed through to license grant on May 10, 2026.

The Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 makes BIS ISI Mark certification under IS 302 Part 1:2024 mandatory for electric mat manufacturers - with the general compliance deadline set at October 1, 2026.

HAESI GHL Private Limited is already certified. Their license is operative. Their products carry the ISI Mark and are legally compliant for sale across India.

If your electric mat manufacturing unit is still operating without a valid BIS license — you are not just behind a competitor. You are behind a legal deadline. After October 1, 2026, manufacturing or selling uncertified electric mats is a direct violation of the QCO 2026, enforceable under the BIS Act, 2016 — with penalties, seizure, and market lockout as consequences.

Getting certified before the deadline also gives you transition protection: manufacturers with a valid BIS application filed before the implementation date are permitted to sell declared existing stock for up to six months. Wait until after the deadline and you lose even that.

Standphill India manages the complete IS 302 Part 1:2024 BIS certification process — factory gap analysis, documentation, BIS application, laboratory testing coordination, factory audit support, and post-audit follow-up until your license is granted. No guesswork. No failed audits. No missed deadlines you didn't see coming.

The deadline is October 1, 2026. The time to start is now.

Contact Standphill India today for a free IS 302 Part 1:2024 BIS certification consultation — and get your electric mat manufacturing unit compliant, certified, and commercially protected before enforcement begins.

PVC geomembranes in Palghar. Safety glass in Bengaluru. Performance shoes across Jalandhar. Smart meters in Bengaluru. Pharma foils in Noida. Woven cement sacks in Nagpur. Fire doors in Ghaziabad. Surgical gowns in Delhi. UPVC windows in Hyderabad. Precast concrete pipes in Nagaland. Stainless steel tubes from South Korea. Electric mats in Khushkhera. Electrical appliances across India — IS 302 Part 1:2024 QCO 2026 compliant.

Over 20 years. More than 10,000 certifications globally. 8,000+ clients served.

BIS ISI Mark · CRS Registration · FMCS Foreign Manufacturer Certification · PESO Approval · WPC Certification · EPR Compliance

Standphill India — India's leading BIS certification consultant. Your partner in global compliance.

Contact us today for a free consultation.