BIS Certification for Spoons IS 16286:2014 - Aadi Product, Samaypur, North West Delhi | Standphill India

Standphill India successfully completed BIS ISI Mark certification under IS 16286:2014 for Aadi Product - a spoons manufacturer based at Ground Floor, A-52, Gali No. 9, Samaypur, North West Delhi, Delhi 110042. The BIS license bearing number 8100217*** was officially granted on December 4, 2025. Standphill India managed the complete certification process from factory assessment to final license grant.

Aadi Product is a spoons manufacturer based at Samaypur - a dense residential and small-scale manufacturing locality in North West Delhi within the 110042 pin code zone. North West Delhi is home to a significant concentration of small and medium consumer goods manufacturers who supply Delhi's wholesale markets, FMCG distributors, and the national e-commerce networks that distribute household and kitchenware products across India.

Spoons are among the most widely consumed kitchenware products in India - used daily across households, restaurants, school mid-day meal programmes, institutional canteens, and food service operations. As food-contact products used by consumers of all ages, the material quality, surface finish, dimensional consistency, and mechanical integrity of spoons directly affect consumer safety and satisfaction. 

BIS certification under IS 16286:2014 ensures every spoon manufactured by Aadi Product meets India's mandatory quality standards - making their products legally compliant and commercially accepted by organised retail, e-commerce platforms, and institutional buyers that mandate BIS-certified kitchenware.

Standphill India has now delivered IS 16286:2014 BIS certification for spoon manufacturers at two Delhi NCR locations - Shapes Products Private Limited at Kundli, Sonipat, and Aadi Product at Samaypur, North West Delhi - reflecting growing compliance adoption across India's kitchenware manufacturing belt.

IS 16286:2014 is the Bureau of Indian Standards mandatory specification for spoons - covering material quality, dimensional requirements, surface finish, and performance standards that manufacturers must satisfy to legally manufacture and supply spoons in India.

Key requirements include food-safe material composition, dimensional tolerances for bowl dimensions, handle length, and overall proportions, surface finish quality ensuring freedom from sharp edges, burrs, and defects that could cause injury or compromise hygiene, mechanical strength under defined load conditions, and ISI Mark identification on every certified product or its packaging.

BIS certification under IS 16286:2014 is mandatory. Organised retail chains, e-commerce platforms, government canteen procurement, mid-day meal programme supply chains, and institutional food service buyers all specify BIS-certified spoons as a standard procurement requirement.

For full details on IS 16286:2014 requirements and the BIS certification process:

Also Read: BIS Certification for Spoons - IS 16286:2014

Aadi Product - operating from Samaypur, North West Delhi - is certified. Their spoons carry the ISI Mark under IS 16286:2014. They are legally compliant and commercially qualified to supply every organised retailer, e-commerce platform, institutional buyer, and government procurement agency that mandates BIS-certified kitchenware.

Delhi's kitchenware manufacturing belt - spanning North West Delhi, Bawana, Narela, and the surrounding areas - is one of the most actively surveilled for BIS compliance in the consumer goods sector. If your spoon manufacturing unit is operating without a valid IS 16286:2014 BIS license, the exposure is real. Non-certified products face e-commerce delisting, institutional buyer rejection, and enforcement action under the BIS Act, 2016.

Standphill India has certified spoon manufacturers across Delhi NCR - Samaypur and Kundli. We know this product, this standard, and this process.

Every spoon you make deserves to reach every buyer legally. Get certified.

Contact Standphill India today for a free IS 16286:2014 consultation - and get your spoon manufacturing unit certified, compliant, and commercially unrestricted.

Every product page on this site tells one certification story. But for most manufacturers - whether you are based in India, China, South Korea, Taiwan, Germany, or anywhere else in the world - that story is rarely the whole compliance picture. A BIS ISI Mark license is one approval. WPC for your wireless module is another. BEE star rating if your product is energy-notified. EPR registration for your e-waste obligations. LMPC for your packaging labels. FMCS if you are an overseas manufacturer supplying India directly. CRS registration for every electronics model you sell in the Indian market. And if you are also navigating CDSCO, PESO, or TEC approvals - the compliance landscape only gets wider.

India is one of the world's fastest-growing consumer markets - and one of its most complex regulatory environments. Every product that enters India, whether manufactured domestically or imported from overseas, must meet India's mandatory certification and compliance requirements before it can be legally sold, distributed, or used. For global manufacturers targeting India, getting this right is not optional - it is the price of entry.

Standphill India manages all of it. Under one roof. With one team. On one coordinated timeline. You do not need a different consultant for every approval - you need one partner who knows every approval your product needs for the Indian market and delivers them together, whether your factory is in Noida or Nagaland, in Seoul or Shenzhen, in Stuttgart or Singapore.

BIS ISI Mark · CRS Registration · FMCS · WPC / ETA · BEE Star Rating · EPR & E-Waste · PESO · CDSCO · TEC Approval · Eco Mark · CEE · LMPC · and beyond

Over 20 years. More than 10,000 certifications globally. 8,000+ clients served across India and internationally. One partner for all of it.

Contact Standphill India today for a free consultation - tell us where your product is made and where you want to sell it, and we will tell you every approval it needs and exactly how we deliver them.