BEE Certification for LED Lights

LED lamps replaced incandescent and CFL bulbs precisely because they deliver far more light per watt - so it is fitting that their BEE star rating is built entirely around luminous efficacy, measured in lumens per watt (L/W). Self-ballasted LED lamps (the common screw/bayonet retail bulbs) are in the BEE mandatory category: every such lamp sold in India must carry the star label.

The star bands are set by the BEE LED schedule under the BEE Standards & Labelling programme: lamps must meet a minimum luminous efficacy (around 79 L/W as the entry floor, with higher bands such as 90+ L/W earning more stars), tested on a batch of samples with defined pass criteria. Lumen maintenance is also checked - a quality LED should retain a high percentage of its initial output after long operation.

It is important not to confuse the two LED approvals. IS 16102 is the BIS standard covering LED lamp safety, performance and quality (a separate BIS certification), while the BEE star label rates only energy efficiency via luminous efficacy. Most LED manufacturers and importers need both. Standphill India runs the complete LED compliance package - BIS under IS 16102 plus BEE star labelling - with batch testing coordinated at approved labs, and full importer-route handling for brands sourcing LEDs from overseas.

For LED lamps, the star rating is driven purely by how efficiently the lamp turns watts into light:

• Luminous efficacy (L/W) = light output (lumens) ÷ power consumed (watts) - the core star metric
• Lamps must meet a minimum efficacy floor (around 79 L/W) to qualify; higher bands (e.g. 90+ L/W) earn more stars
• Testing is done on a batch of samples (typically 10) with defined average-efficacy pass criteria
• Lumen maintenance is verified - the lamp should retain ~95% of output at 1000 hours of operation
• Higher efficacy = fewer watts for the same brightness = lower electricity bills and more stars
• The label shows wattage, lumens, efficacy and the star band so buyers can compare bulbs directly

Typical timeline: a few weeks to a couple of months, driven mainly by lab testing and document readiness. Standphill India runs all five stages for you.

• Company incorporation / registration
• GST & PAN
• Brand / trademark certificate
• Authorised signatory letter
• Copy of valid BIS certificate for the LED lamp (IS 16102)
• ISO 9001 of manufacturing unit (if available)
• NABL/BEE-approved lab test report (Luminous Efficacy)
• Model technical specifications
• Sample BEE label / specimen
• User manual & product images
• Security deposit payment receipt
• For importers: import & authorisation papers

LED compliance trips up many makers because it needs two separate approvals - BIS under IS 16102 and the BEE star label - each with its own testing. Standphill India is a specialist BEE certification consultant for LED lights: we coordinate luminous-efficacy batch testing, run brand and model registration, generate the correct star label, and pair it with BIS IS 16102 so your bulbs are fully market-ready. Indian manufacturers and LED importers, handled end-to-end.