BIS Certification for Fire Doors IS 3614:2021 - ASES Security Private Limited, Sahibabad, Ghaziabad | Standphill India

Standphill India successfully completed BIS ISI Mark certification under IS 3614:2021 for ASES Security Private Limited - a fire door manufacturer based at A-2/69, Site 4, Sahibabad, Ghaziabad, Uttar Pradesh. The BIS license bearing number 8800****** was officially granted on August 2, 2024. Standphill India handled the complete certification process - from factory gap analysis at the Sahibabad facility to final license grant.

ASES Security Private Limited is a fire door manufacturer based in Sahibabad, Ghaziabad - one of India's most prominent industrial manufacturing zones located in the National Capital Region. Sahibabad's Site 4 industrial area is home to hundreds of manufacturing units supplying to construction, infrastructure, and industrial markets across North India. ASES Security produces fire doors - a critical safety product used across commercial buildings, factories, warehouses, hospitals, hotels, and residential complexes to contain fire and limit its spread. With BIS ISI Mark certification under IS 3614:2021 being mandatory for fire door manufacturers in India, ASES Security Private Limited engaged Standphill India to manage the complete certification - and received their license on August 2, 2024.

IS 3614:2021 is the Bureau of Indian Standards specification for fire check doors — doors specifically designed and manufactured to resist the passage of fire, smoke, and heat for a defined fire resistance period. These doors are a critical component of passive fire protection systems in buildings, creating fire compartments that slow down the spread of fire and give occupants time to evacuate safely.

IS 3614:2021 defines mandatory requirements covering:

• Fire resistance performance — the door must maintain structural integrity and insulation for the rated fire resistance period under standardised fire test conditions
• Door leaf construction requirements including material specifications, thickness, and core composition
• Frame and hardware requirements — hinges, closers, latches, and seals must all meet defined performance standards
• Smoke and intumescent sealing requirements to prevent smoke passage
• Dimensional accuracy and clearance tolerances between door leaf and frame
• Hardware performance under fire conditions
• Marking and labelling requirements for certified fire doors

BIS certification under IS 3614:2021 is mandatory for fire door manufacturers under the BIS Act, 2016. Fire doors used in commercial buildings, industrial facilities, hospitals, schools, and high-rise residential buildings increasingly require BIS ISI Mark compliance — both as a legal requirement and as a specification condition under building codes, fire safety regulations, and project tender documents.

1. ) BIS ISI Mark license 8800****** granted August 2, 2024

2. ) Fire Doors - IS 3614:2021 (Option 1)

3. ) First-attempt factory audit success

4. ) First-attempt product testing clearance

5. ) End-to-end managed by Standphill India

6. ) ASES Security Private Limited authorised to manufacture and supply BIS ISI Mark certified fire doors across India

Factory Gap Analysis and Compliance Assessment

Standphill India conducted a thorough pre-audit inspection at ASES Security's Sahibabad manufacturing facility — assessing the fire door production process, material specifications, fabrication quality controls, door testing infrastructure, and documentation system against IS 3614:2021 requirements. Every gap was identified and a corrective action plan was put in place before the BIS application was filed. For a product like a fire door — where compliance is about life safety — getting the factory genuinely ready before the audit is not optional. It is the only way to do it right.

BIS Application and Documentation

Standphill India prepared the complete BIS ISI Mark license application for ASES Security under IS 3614:2021 — covering fire door product specifications, construction and material details, manufacturing process documentation, plant and machinery information, in-house quality and testing setup, and all required declarations. Every document was verified internally before submission to the BIS portal.

Product Testing Coordination

Standphill India coordinated fire door sample testing at a BIS-recognised testing laboratory for all mandatory IS 3614:2021 parameters — including fire resistance performance under standardised fire test conditions, structural integrity assessment, door leaf and frame construction evaluation, hardware performance, and smoke sealing verification. The client's team was guided on sample preparation and submission, and all test parameters were cleared on the first attempt.

BIS Factory Audit Support and License Grant

Standphill India provided on-ground support throughout the BIS factory inspection at the Sahibabad facility — managing documentation, technical discussion with the BIS officer, and all audit observations. The audit concluded without major non-conformances. Post-audit follow-up was handled by Standphill India until license 8800****** was officially granted on August 2, 2024.