BIS Certification for Electric Bean Slicers is mandatory under IS 302 Part 1:2024. Learn about IS 302 Part 2/Section 14:2018 & IS 302 Part 1:2024 standards, mandatory and optional tests, certification process, compliance timelines, benefits, penalties, and import/export rules. Standphill India – expert BIS consultant.

BIS Certification for Electric Bean Slicers - IS 302 Part 1:2024

Electric Bean Slicers are widely used in homes, hotels, restaurants, food-processing units, and commercial kitchens. These appliances are designed to cut or slice beans efficiently, saving time and improving food preparation. Since they operate with electricity and involve direct contact with food and moving parts, ensuring safety, performance, and hygiene standards is critical.

To ensure quality, durability, and consumer protection, the Government of India has made BIS Certification mandatory for Electric Bean Slicers under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025 (QCO 2025).

From 19th March 2026, manufacturers, importers, and sellers will not be allowed to sell or market electric bean slicers in India without a valid BIS ISI Mark. This regulation falls under the Bureau of Indian Standards Act, 2016.

Applicable Indian Standards

Electric Bean Slicers are regulated under:

1. ) IS 302 (Part 2/Section 14): 2018 – Particular requirements for kitchen machines, including bean slicers and food processors.

2. ) IS 302 (Part 1): 2024 – Household and Similar Electrical Appliances – Safety – General Requirements.

3. ) International Alignment – Aligned with IEC 60335-1:2020 and IEC 60335-2-14, ensuring harmonized safety practices.

Scope of the Standard

1. ) The standard covers:

I. ) Electric Bean Slicers used in domestic, institutional, and commercial kitchens.

II. ) Appliances operating at voltages up to 250 V for single-phase AC/DC.

III. ) Both portable and table-top slicers intended for indoor use.

2. ) Not covered under this standard:

I. ) Industrial food-processing slicers used in factories.

II. ) Non-electric/manual bean slicers.

III. ) Outdoor-use slicing equipment.

Certification Scheme

Electric Bean Slicers are certified under the ISI Mark Certification Scheme (Scheme I) as per the BIS Conformity Assessment Regulations, 2018.

Only products that pass mandatory safety and performance tests are allowed to bear the ISI Mark, which is proof of compliance with Indian Standards.

Implementation Timeline under QCO 2025

The Quality Control Order introduces phased compliance to ease transition:

1. ) General Manufacturers – Must comply by 19th March 2026.

2. ) Small Enterprises – Must comply by 19th June 2026.

3. ) Micro Enterprises – Must comply by 19th September 2026.

Mandatory Tests for Electric Bean Slicers

As per IS 302 Part 2/Section 14:2018 and IS 302 Part 1:2024, manufacturers must conduct the following mandatory tests:

1. ) Protection Against Electric Shock – Ensures user safety from live parts.

2. ) Input Power and Current Test – Confirms the appliance works within safe electrical limits.

3. ) Heating Test – Checks overheating risks during continuous operation.

4. ) Insulation Resistance & Leakage Current Test – Prevents electrical hazards.

5. ) Mechanical Strength Test – Ensures housing, casing, and moving parts are durable.

6. ) Sharpness and Safety of Blades – Validates safe slicing without mechanical hazards.

7. ) Stability and Structural Test – Ensures product does not tip or vibrate excessively.

8. ) Marking and Instructions Verification – Confirms proper labeling of voltage, manufacturer details, and safety guidelines.

9. ) Resistance to Heat and Fire Test – Ensures enclosures can withstand high temperatures.

Optional Tests (If Applicable)

1. ) Overload Protection Test – Ensures the motor shuts down safely in case of overuse.

2. ) Abnormal Operation Test – Simulates misuse conditions.

3. ) Endurance Test – Evaluates long-term performance under repeated use.

4. ) Resistance to Moisture Test – Ensures safe operation in humid kitchens.

5. ) Blade Wear Resistance Test – Verifies durability of slicing blades.

BIS Certification Process for Electric Bean Slicers 

For Indian Manufacturers ( Click Here To Know More About It :- BIS Certification for Indian Manufacturers ) 

1. ) Submit application through BIS online portal under ISI Mark Scheme.

2. ) Send product samples for testing at a BIS-approved laboratory.

3. ) Factory inspection by BIS officers to verify quality systems.

4. ) License granted after successful compliance.

5. ) Timeline: 30–45 days.

For Foreign Manufacturers ( Click Here To Know More About It :- BIS Certification for Foreign Manufacturers (FMCS). ) 

1. ) Appoint an Authorized Indian Representative (AIR).

2. ) Submit application and send product samples for BIS lab testing.

3. ) BIS inspection of manufacturing facility abroad.

4. ) Grant of license upon compliance.

5. ) Timeline: 120–180 days.

Import and Export Applicability

1. ) Imports into India: Electric Bean Slicers without BIS ISI certification will not be cleared by Customs from 19th March 2026.

2. ) Exports from India: BIS-certified products are globally recognized, as IS standards align with IEC, providing export opportunities.

3. ) Key Import Sources for India: China, Taiwan, Japan, South Korea, and Germany.

Benefits of BIS Certification for Electric Bean Slicers

1. ) Mandatory Legal Compliance – Required under QCO 2025 for sales in India.

2. ) Consumer Protection – Guarantees safety, durability, and reliability.

3. ) Market Preference – ISI-marked products are trusted by Indian consumers.

4. ) Global Acceptance – Certification opens opportunities for exports.

5. ) Competitive Edge for MSMEs – BIS-certified MSMEs can participate in government tenders.

6. ) Brand Credibility – ISI mark enhances product reputation and acceptance.

Penalties for Non-Compliance

As per the BIS Act, 2016:

1. ) Uncertified products will be seized.

2. ) Import and sales of uncertified slicers will be prohibited.

3. ) Monetary penalties will be imposed.

4. ) Business licenses can be suspended or cancelled.

Conclusion

The BIS Certification for Electric Bean Slicers under QCO 2025 is a mandatory compliance requirement effective from 19th March 2026. Manufacturers and importers must ensure their products meet the prescribed standards and testing requirements to avoid penalties.

Certification not only ensures legal compliance but also enhances consumer trust, product credibility, and global market acceptance.

Standphill India offers complete consultancy for BIS Certification – including application filing, product testing, documentation, audit preparation, and license grant. We ensure smooth compliance for both Indian and foreign manufacturers.

Frequently Asked Questions (FAQs)

Q1. Which BIS standards apply to Electric Bean Slicers?

Ans: IS 302 (Part 2/Section 14):2018 and IS 302 (Part 1):2024.

Q2. From when is BIS Certification mandatory?

Ans: From 19th March 2026 (with later deadlines for MSMEs).

Q3. Who needs BIS Certification for Electric Bean Slicers?

Ans: All manufacturers, importers, and sellers in India.

Q4. What are the mandatory tests for certification?

Ans: Electric shock protection, heating, leakage, blade safety, endurance, and structural stability.

Q5. What happens if uncertified products are sold?

Ans: Goods may be seized, heavy fines imposed, and licenses cancelled.

For More Blogs Click Here

• BIS Certification for Electric Water Boilers
• BIS Certification for Electric Call Bells and Buzzer
• BIS Certification for Electric Heating Tools
• BIS Certification for Massage Appliances
• BIS Certification for Appliances for Heating Liquids
• BIS Certification for Insect Killer
• BIS Certification for Vacuum Cleaners & Water Suction Cleaning Appliances
• BIS Certification for Electric Steam Cooker
• BIS Certification for Spin Extractor
• BIS Certification for Tumbler Dryer
• BIS Certification for Electric Coffee Makers
• BIS Certification in UAE
• bis certification in european countries
• BIS Certification Consultant in Indonesia
• BIS Certification Consultant in Germany
• BIS FMCS Licence for Foreign Companies
• BIS Certification for Footwear
• BIS Scheme X Certification Process